Zoom 35 ~ 70mm Auto Focus camera, in case of power have the time, batteries, flash symbol appears, the normal action telescopic lens, close the back cover has a motor action, but pressing the shutter -Service Manual Download|Circuit Download|Download Drawings|schematic download|route map download|free download user manual

Your current location：Home > Technical Articles > Camera

Zoom 35 ~ 70mm Auto Focus camera, in case of power have the time, batteries, flash symbol appears, the normal action telescopic lens, close the back cover has a motor action, but pressing the shutter

Time：2014-05-15 07:56:06 Source：Network Author：Unknown Clicks：1251

( 2 ) from the rear of the lens shutter assembly which loosen and remove the two black screws to remove the front of the camera fixed ring , focus ring gear , lenses, spring , then you can see the shutter solenoid, motor and focusing focusing gear .
( 3 ) Remove the lens shutter assembly glue around the paper , carefully unfold replacement retractable soft belt , be sure to pay attention to the use of a soldering iron tips here when replacing the soft zone , to avoid scorch the other components.
( 4 ) When the retractable soft belt replacement is good, according to the reverse order of removal replace the lens assembly , which then points to the soft belt with 3V power supply, focus and shutter solenoid motor work is flexible, soft belt in the middle three thickest line is a common intermediate , respectively, and the remaining two combinations, can test the state of the motor and shutter work , to be flexible after the final installation.
Installation Tips :
( 1 ) In the Replace , be sure to grasp the attention must be fixed clean test machine to test all aspects of the position and the joints , and the lens is solid.
( 2 ) Before assembling the cover must pay attention to the flash automatically open the zoom lever position falls notch , otherwise easy to replace when the lever is pressed down , you can replace the front , open the camera back cover , light light push the edge of the zoom lens group , so that the lens slightly to reach it , so you can increase the gap at the position of the zoom lens , and then press and hold the flash with your fingers , then put back the front cover , so as not broken flash lever.

2 Home Previous 1 2