Troubleshooting: general camera was broken, the main circuit board and lens assembly is being damaged. Once the board fall break, you need to replace the motherboard; lens fell into it, causing not drive off, or shut down "E18" error occurs when the alarm is turned on. Overhaul, open the cabinet. Note that when you open the cabinet make shooting and playback buttons located in the "shooting" status to prevent the micro-switch on the board to pull bad shape. Remove the motherboard and display the main pieces, you can remove the demolition of the main pieces of zoom, zoom main parts, to operate in a clean box to prevent dust falling into the lens and CCD. Sony A60 / A70 digital camera, zoom gear used by more generous, not easy to broken teeth, most of the deformation dislocation. Will remove the gears, motors, metering focusing element classification put away. Then re-dislocation of gear being assembled to be careful when installing to prevent malfunction scope.9u9service manual download site